Levels & Measures

Levels and measures are the tools used to mark out, align and measure accurately, and for electricians they also include draw tapes for pulling cable through conduit. Stock includes the C.K Softech 5m tape measure, C.K 210mm pocket spirit level, SpiraFLEX draw tapes in 10m, 20m and 30m lengths and a Deligo 20m x 3mm nylon draw tape.

Small kit, big difference to a neat install. Trade customers buy at trade prices, and anything in stock ordered before the 5pm weekday cut-off is delivered next working day in NI and ROI.

T3442-16 In-Stock

C.K Softech Tape Measure 5m/16ft T3442-16

£9.28 inc. VAT

T3482 In-Stock

C.K Pocket Spirit Level 210mm T3482

£18.31 inc. VAT

SpiraFLEX Draw Tape - 10M with Meteor Electrical

T5510 Ships in 3 - 5 days

C.K SpiraFLEX Draw Tape 10m T5510

£37.43 inc. VAT

SpiraFLEX Draw Tape - 20M with Meteor Electrical

T5520 Ships in 3 - 5 days

C.K SpiraFLEX Draw Tape 20m T5520

£45.66 inc. VAT

SpiraFLEX Draw Tape - 30M with Meteor Electrical

T5530 In-Stock

C.K SpiraFLEX Draw Tape 30m T5530

£86.46 inc. VAT

DTN20 In-Stock

Deligo 20m x 3mm Nylon Draw Tape

£5.68 inc. VAT

Choosing levels, tapes and draw tapes

Accurate setting out is what makes sockets line up, trunking run true and downlights sit in neat rows. This small range covers the measuring basics plus the draw tapes that make cable pulling easier.

Tape measures

A 5m tape covers most room-scale work and fits a pocket or belt. Look for a clear, readable blade, a solid lock and a hook that is true for both inside and outside measurements. Soft-grip cases, such as the C.K Softech, help on cold sites.

Spirit levels

A pocket level around 200mm long is ideal for setting accessories, back boxes and small enclosures. For long runs of trunking, tray or lighting, a longer level or laser line is often used alongside it. Check the vial accuracy occasionally by reading the level, turning it end to end and reading again on the same surface.

Draw tapes

SpiraFLEX draw tapes – spiral-wound tapes in 10m, 20m and 30m lengths that push through conduit and bends.
Nylon draw tape – 3mm nylon, flexible and light for general cable pulling.
Choosing length – pick a tape longer than your longest run between draw-in points.

Attach cables securely and stagger the ends so the bundle passes smoothly through bends. Do not overfill the conduit; check capacity tables in the containment manufacturer's guidance or current wiring regulations.

Related products

Use draw tapes with PVC conduit and flexible conduit, and see the wider hand tools range.

Meteor Electrical stocks over 5,000 products. Free delivery applies above £30 or €35 ex VAT, and Click & Collect is available in Cookstown.

FAQ's Ask Your Own Question

What is a draw tape used for?: A draw tape is pushed through conduit or a duct so that cables can be attached to the end and pulled back through. It saves time on long runs and runs with bends where cables cannot be pushed. Spiral or nylon draw tapes are flexible enough to negotiate bends but stiff enough to push, and they come in various lengths.
What length draw tape do I need?: Choose a draw tape longer than the longest run between draw-in points, with extra to grip at both ends. A 10m tape suits domestic runs, while 20m or 30m tapes are better for commercial conduit and longer containment. This range includes SpiraFLEX tapes in 10m, 20m and 30m and a Deligo 20m nylon tape.
How do I check if a spirit level is accurate?: Place the level on a flat surface and note the bubble position, then turn it end to end in exactly the same spot. If the bubble reads the same, the level is accurate; if not, the vial is out. Repeat on a vertical surface for plumb vials. Replace a level that has been dropped and fails this check.
What mounting height should sockets be at?: In new dwellings, building regulations guidance commonly requires sockets and switches to be positioned within a set height range above floor level to improve accessibility. The exact figures depend on the jurisdiction and building type. Check current building regulations for your location, and use a tape and level to keep accessories consistent.
Can I use a draw tape in flexible conduit?: Yes, draw tapes work in flexible conduit as well as rigid PVC and steel conduit. Flexible conduit has a ribbed interior, so a smooth, spiral-wound tape helps reduce friction. Keep the conduit as straight as practical while pulling and avoid exceeding the recommended cable capacity for the conduit size.
Is a pocket level accurate enough for electrical work?: A pocket level of around 200mm, such as the C.K 210mm model, is accurate enough for setting sockets, switches, back boxes and small enclosures. For longer runs of trunking, tray or rows of luminaires, a longer level or laser line gives better results because small errors are magnified over distance.