Workwear & PPE | Gloves & Glasses

CK's Clear Wraparound Safety Glasses by Meteor Electrical

AV13021 In-Stock

Avit Clear Wraparound Safety Glasses AV13021

£8.96 inc. VAT

CK's Tools: Nitrile Coated Gloves - Size Large by Meteor Electrical

AV13072 In-Stock

Avit Nitrile Coated Gloves Size L AV13072

£2.65 inc. VAT

CK's PU Coated Glows - Size Large by Meteor Electrical

AV13074 In-Stock

Avit PU Coated Work Gloves Size L AV13074

£2.08 inc. VAT

CK's USB Rechargeable LED Head Torch x2 by Meteor Electrical

T9608R2 In-Stock

C.K USB Rechargeable LED Head Torch 80 Lumens Twin Pack T9608R2

£20.92 inc. VAT

MA2632 In-Stock

C.K Magma Tech Tool Case Plus MA2632

£123.60 inc. VAT

Choosing workwear and safety equipment

Personal protective equipment is the last line of defence after hazards have been designed out or controlled, but on a busy site it is used every day. Getting the right kit, and making sure it fits, means it is more likely to be worn.

What is in the range

Safety glasses – clear wraparound lenses for drilling, cutting, chasing and working overhead, giving side protection from dust and debris.
Nitrile coated gloves – good grip in oily or damp conditions with reasonable abrasion resistance.
PU coated gloves – thin and dexterous, ideal for handling small components, fixings and terminations.
LED head torches – rechargeable via USB, leaving both hands free in lofts, ceiling voids and plant rooms.
Tool case – the C.K Magma Tech Tool Case Plus for keeping tools and PPE organised.

What to check

Look for markings showing compliance with the relevant standards for eye and hand protection, and check the performance ratings on gloves for abrasion and cut resistance. Size gloves properly: loose gloves reduce grip and dexterity. Note that general work gloves are not electrically insulating; insulating gloves are a separate, specialist product. Your employer's risk assessment should set what PPE is needed for each task.

Care and replacement

Replace safety glasses when lenses are scratched, and gloves when coatings wear through. Recharge head torches after use so they are ready for the next job. Keep PPE clean and stored away from sharp tools.

Related products

See fibreglass ladders, tool storage and temporary site lighting.

Meteor Electrical is a family-run wholesaler with 40+ years' experience. Free delivery applies over £30 or €35 ex VAT; call 028 8675 1515 for help.

FAQ's Ask Your Own Question

What is the difference between nitrile and PU coated gloves?: Nitrile coated gloves offer stronger grip in oily or wet conditions and generally better abrasion resistance, so they suit handling cable drums, containment and fixings. PU coated gloves are thinner and more breathable with excellent dexterity, making them better for fine work such as terminations and small components. Many electricians keep both types.
Are work gloves electrically insulating?: No, standard coated work gloves such as nitrile or PU gloves are designed for grip and abrasion protection and do not provide electrical insulation. Insulating gloves for live working are specialist products tested to specific voltage classes. Always isolate and prove dead, and follow your employer's procedures before working on electrical equipment.
When should electricians wear safety glasses?: Safety glasses should be worn whenever there is a risk of debris or dust entering the eyes, such as drilling, chasing walls, cutting with grinders, working overhead or using fixings tools. Wraparound styles give side protection. Your risk assessment and site rules will specify when eye protection is required, and some tasks may need goggles or a face shield.
Why use a head torch instead of a hand torch?: A head torch points light wherever you look and leaves both hands free, which is safer and more practical in lofts, ceiling voids, under floors and in dark plant rooms. USB rechargeable models avoid the need for spare batteries. Keep one charged in the van so you are never caught out on a dark job.
What size gloves should I buy?: Glove size is usually based on hand circumference around the palm, excluding the thumb, and length from wrist to the tip of the middle finger. Gloves should fit snugly without restricting movement, as loose gloves reduce grip and can catch. The coated gloves currently stocked are in size large; check the manufacturer's sizing guide.
Can I open a trade account for PPE purchases?: Yes, trade accounts are available and give access to trade pricing across the range, including workwear and safety items, and credit accounts are available subject to approval. Orders over £30 or €35 ex VAT ship free. Call 028 8675 1515, or 048 8675 1515 from ROI, between 8am and 5pm to discuss an account.

Workwear & Safety