Disabled Toilet Alarms

A disabled toilet alarm is an assistance call system that lets someone in an accessible WC summon help by pulling a ceiling cord. Our 3-part nurse call kit includes the pull cord switch, an overdoor indicator with sounder and a reset button, giving a straightforward solution for offices, shops, schools and public buildings.

Account customers receive trade pricing, and in-stock orders placed by 5pm on a working day arrive the next working day anywhere in Northern Ireland or the Republic of Ireland.

UDTAKIT In-Stock

3 Part Disabled Toilet Alarm Nurse Call Kit

£50.40 inc. VAT

How to choose and fit a disabled toilet alarm

Accessible toilets in non-domestic buildings are normally expected to include an emergency assistance alarm. A kit like the one we stock bundles the core parts into a single purchase, so you know the components are designed to work together.

What a typical kit includes

Ceiling pull cord: usually a red cord with bangles, reachable from the toilet and from the floor.
Overdoor indicator and sounder: mounted outside the WC so staff can see and hear that help is needed.
Reset button: fitted inside the cubicle so the alarm is cancelled by whoever responds, confirming help has arrived.

Points to check before installing

Confirm the supply voltage the kit needs and whether a separate power supply or fused spur is required. Plan cable routes between the pull cord, reset unit and overdoor indicator, and consider whether the alarm should also signal to a reception desk or staffed area. Positioning of the pull cord and reset button is usually guided by accessibility standards and building regulations, so check current requirements and the manufacturer's instructions.

Complementary accessories

Many accessible bathroom projects also use contrasting, easy-grip Part M switches and sockets to help users with visual or dexterity impairments. For wiring between components, our alarm cable and general wiring accessories cover the essentials.

Testing and maintenance

Test the alarm regularly by pulling the cord and confirming the indicator and sounder operate, then reset from inside the cubicle. Make sure the cord hangs freely and has not been tied up or shortened, as this is a common fault in busy buildings.

We are a family-run electrical wholesaler based in Cookstown, Co. Tyrone, with depots in Cashel and Saggart. Free delivery applies to orders over £30 / €35 ex VAT, and our team is available on 028 8675 1515 (048 8675 1515 from ROI), Monday to Friday 8am–5pm.

FAQ's Ask Your Own Question

Is a disabled toilet alarm a legal requirement?: In most non-domestic buildings with an accessible WC, an emergency assistance alarm is expected under building regulations and accessibility guidance. The exact requirement depends on the building's use and location, so check current building regulations for your project and consult the building control body if you are unsure.
Where should the pull cord be positioned in an accessible toilet?: The pull cord is normally fixed to the ceiling so the cord hangs close to the toilet, reachable both when seated and by someone who has fallen to the floor. Guidance typically specifies the cord colour, bangles and a low bottom bangle height. Check current accessibility guidance and the manufacturer's instructions for precise dimensions.
Why is the reset button inside the toilet rather than outside?: Placing the reset button inside the cubicle means the alarm can only be cancelled by someone who has entered the room to help. This prevents passers-by silencing the call without checking on the person. Some users may also reset an accidental activation themselves if they can reach the button.
Can a disabled toilet alarm connect to a reception or staff area?: Many systems can be extended with a remote indicator or repeater so that a call is also signalled at reception or a staffed point. This is useful where the overdoor light may not be seen quickly. Check the kit's manufacturer details to confirm what add-on units are compatible before planning the installation.
Who should install a disabled toilet alarm kit?: A competent electrician should install the kit, particularly where it is mains powered or connected to a fused spur. They will route the cabling between components, confirm the positions meet accessibility guidance and test the system before handover. Follow current wiring regulations and the kit's installation instructions throughout.
What happens if the pull cord is tied up or removed?: If the cord is tied up out of reach or cut short, a person who has fallen may not be able to raise the alarm. Building managers should check cords during routine inspections and restore them to full length. Replacement cords and bangles are usually available from the alarm manufacturer.