Strippers & Crimp Tools

Wire strippers and crimp tools remove cable insulation cleanly and fix terminals or connectors onto conductors with a consistent, secure crimp. The range is built around C.K Tools: an automatic wire stripper, ratchet crimp pliers, a cable crimper for RJ11 and RJ45 plugs, and the Armourslice SWA cable stripper with spare blades.

Together they cover everyday flex and twin and earth, data terminations and armoured cable prep. Buy on a trade account at trade prices, with orders placed before 5pm Monday to Friday delivered next working day in NI and ROI.

T3698A In-Stock

C.K Ratchet Crimping Pliers Coax BNC/TNC 1.0-6.48mm T3698A

£86.26 inc. VAT

T3673 In-Stock

C.K Compact Crimper for Modular Plugs 6P/8P RJ11 RJ45 T3673

£51.00 inc. VAT

T2250 In-Stock

C.K ArmourSlice SWA Cable Stripper 12-36mm T2250

£64.28 inc. VAT

C.K Armourslice SWA Cable Stripper Spare Blades T2255

T2255 In-Stock

C.K ArmourSlice Replacement Blades Pack of 5 T2255

£8.57 inc. VAT

T3943 In-Stock

C.K Automatic Wire Stripper Pro T3943

£41.94 inc. VAT

How to choose strippers and crimp tools

Good stripping and crimping are the foundation of a reliable termination. A nicked conductor or a loose crimp can cause overheating or intermittent faults, so it pays to use tools designed for the cable and terminal in front of you.

Types of stripper

Automatic wire strippers – grip and strip in one squeeze, adjusting to the conductor size; fast for repetitive work on flex and singles.
SWA cable strippers – such as the C.K Armourslice, which scores and removes the outer sheath of steel wire armoured cable without damaging the armour.
Knife-type and sheath strippers – for removing outer sheaths on twin and earth and multicore cables.

Crimp tools

Ratchet crimp pliers will not release until a full crimp cycle is complete, giving repeatable results on insulated and non-insulated terminals. Match the tool's die to the terminal type and colour (red, blue, yellow). Data crimpers, like the C.K RJ11/RJ45 crimper, terminate modular plugs on telephone and network cable. For larger lugs on submain and earthing conductors, a heavier hydraulic or mechanical lug crimper is normally required, so check the conductor size range before buying.

Getting a good termination

Strip only the length needed so no bare conductor is exposed beyond the terminal. Check strands are not cut or nicked, and give each crimp a gentle pull test. Pair the right tool with suitable crimp connectors or cable lugs, and use proper glands when terminating SWA. Always isolate and prove dead before working, and follow the manufacturer's instructions.

Meteor Electrical stocks 5,000+ products from 100+ trade brands, with free delivery over £30 or €35 ex VAT and Click & Collect at Cookstown.

FAQ's Ask Your Own Question

What is the best way to strip SWA cable?: A dedicated SWA stripper, such as the C.K Armourslice, scores the outer sheath to a set depth so it can be peeled away without nicking the armour wires. The armour is then folded back and cut to length for the gland, and the inner bedding removed carefully. Always follow the gland manufacturer's dimensions and make sure the cable is isolated first.
Why use a ratchet crimper instead of standard pliers?: A ratchet crimper applies a controlled, full-cycle crimp and will not open until it is complete, so every termination gets the same pressure. Ordinary pliers squash the terminal unevenly and can leave loose or over-crushed connections that heat up under load. For reliable terminations, use a ratchet tool with dies matched to the terminal type.
Can one crimp tool do red, blue and yellow terminals?: Many ratchet crimp pliers have three colour-coded dies for red, blue and yellow pre-insulated terminals, covering a range of conductor sizes. Check the tool's specification to confirm which terminals it accepts, as some are for non-insulated or specialist connectors only. Using the correct die is essential for a sound crimp.
What tool do I need to fit RJ45 plugs?: You need a modular plug crimper with an RJ45 die, such as the C.K cable crimper for RJ11 and RJ45. Strip the outer sheath, arrange the pairs in the correct T568A or T568B order, trim them evenly, push them fully into the plug and crimp. Test the finished lead with a cable tester before use.
How do I avoid nicking conductors when stripping?: Use a stripper set or self-adjusting to the correct conductor size, keep blades sharp and replace them when worn, and strip at a right angle to the cable. Automatic strippers are good at avoiding damage on repetitive work. Inspect each conductor after stripping; nicked or cut strands reduce current-carrying capacity and should be cut back and redone.
Can I order spare blades for my cable stripper?: Yes, spare blades are stocked for the C.K Armourslice SWA cable stripper. Like other in-stock items, they can be ordered online by 5pm Monday to Friday for next working day delivery to Northern Ireland and the Republic of Ireland, or collected from the Cookstown trade counter. Call 028 8675 1515 if you need help.