Underfloor Heating
Electric underfloor heating is a system of thin heating mats or loose cables laid beneath the floor finish, turning the whole floor into a gentle, even heat emitter with nothing on the walls. We stock the Heat My Home range: pre-spaced mats from 1m² to 15m² and loose heating cables from 8.4m up to 147m for awkward layouts.
It is ideal under tile and stone in bathrooms, kitchens and conservatories. Electricians on a trade account get trade pricing, and orders placed by 5pm Monday to Friday are delivered next working day across Northern Ireland and the Republic.
How to choose the right underfloor heating kit
Electric underfloor heating is quick to install, needs almost no floor build-up and has no moving parts to maintain. Getting the kit size right at the start is the most important step, because heating elements cannot be cut down on site.
Mats or loose cable?
Heat My Home mats have the cable pre-fixed to a mesh, so they roll out quickly over large, regular areas and can be cut along the mesh (never the cable) to turn corners. Loose cable gives more flexibility around WCs, pedestals, curved walls and narrow strips, with the installer setting the spacing to suit the heat output required.
Sizing your system
- Measure the free floor area only, leaving out baths, shower trays, kitchen units and fixed furniture.
- Choose a mat equal to or slightly smaller than that area; never overlap or bunch elements to use up spare.
- For loose cable, check the coverage guidance for each length in the manufacturer's instructions.
- Plan the thermostat location and the route of the cold tail before you start.
Installation and compliance
Lay the system over an insulation board where possible to direct heat upwards and shorten warm-up times, and test insulation resistance before, during and after laying. Control is via a floor-sensing thermostat such as the Heat My Home 16A touch-button or Wi-Fi models in our digital thermostats range. Heating elements embedded in floors require additional protection, typically a 30mA device, so consider an RCBO for the circuit and size the twin and earth supply cable for the load. Always check current wiring regulations (BS 7671) and the manufacturer's instructions; final connection should be by a qualified electrician.
Buying from Meteor
We are a family-run electrical wholesaler stocking 5,000+ products from 100+ trade brands. Free delivery applies over £30 / €35 ex VAT, with next working day delivery in NI and ROI on in-stock orders placed by 5pm on a weekday.
FAQ's
- What is underfloor heating?
- What sizes are available for underfloor heating?
- Is purchasing a thermostat necessary with underfloor heating?
- Can I put furniture over the underfloor heating?
- Can I install underfloor heating myself?
- Can I install underfloor heating with tiles, carpet or wooden floors?
- Is underfloor heating more efficient than radiators?
- Can underfloor heating catch fire?
- Is underfloor heating expensive to run?
- How long does it take for underfloor heating to heat a room
- Should I use an underfloor heating mat or loose heating cable?
- Can electric underfloor heating cable be cut to length?
- Does electric underfloor heating need RCD protection?






















