Floor Sockets & Floor Outlet Plates

FPR9UBCW Ships in 3-5 days

Knightsbridge 13A 2 Gang Unswitched Floor Socket - Brushed Chrome w/ White Insert

£20.76 inc. VAT

LG9143SNAP-FSCW In-Stock

Selectric 13 Amp Floor Socket 1 Gang Unswitched

£21.52 inc. VAT

STO301 In-Stock

Tass 2 Gang Blank Plate (STO301)

£2.40 inc. VAT

LG9142SNAP-FSCW In-Stock

2 Gang 13 Amp Floor Socket Unswitched

£31.84 inc. VAT

Choosing floor sockets for offices, homes and retail spaces

Floor sockets solve a common layout problem: getting power to the middle of a room without trailing leads across walkways. They are mounted flush in a floor void or screed so the outlet is accessible but out of the way.

Floor sockets versus floor boxes

A floor socket is usually a single accessory, 1 or 2 gang, fitted into a suitable box below floor level. For larger commercial jobs that need power, data and AV at the same point, a dedicated floor box with modular compartments is often a better fit, and pedestal boxes work where the outlet needs to sit above floor level.

What to check before ordering

Gangs: 1 gang for a single appliance, 2 gang for desks and islands
Switching: the floor sockets in this range are unswitched, so equipment is controlled at the appliance or by a local switch
Finish: brushed chrome with white inserts for visible positions in offices and homes
Floor depth: the void or screed must suit the box and cable entry
Blank plates: to close off spare or future positions neatly

Installation and safety tips

Plan positions around furniture so sockets are not hidden under desks or trapped by kitchen units. Keep floor outlets away from areas regularly washed down or exposed to spills, and choose a lid or cover suited to foot traffic where needed. Cable routes should be protected within the floor, for example in conduit or trunking, and circuits should be designed with appropriate RCD protection. Check current wiring regulations and the manufacturer's instructions before installation.

Meteor Electrical is a family-run wholesaler with over 40 years' experience. Order in-stock floor sockets by 5pm for next working day delivery across NI and ROI, or allow 3 to 5 working days to England, Scotland and Wales.

FAQ's Ask Your Own Question

Can a floor socket be installed for a kitchen island?: Yes, floor sockets are one way to power kitchen islands where wall sockets are too far away, although many installers prefer outlets mounted on the island itself to reduce exposure to spills. If you use a floor socket, place it away from the sink and cooking zone and where it will not collect water from mopping. Check current wiring regulations and the manufacturer's instructions for the location.
Are floor sockets switched or unswitched?: Floor sockets are made in both types, but the units in this range are unswitched 13A sockets. Unswitched outlets keep the floor plate low profile and avoid rockers being kicked or stood on. If you need to isolate the equipment, control it at the appliance, use a switched fused spur on a nearby wall, or plan local isolation as part of the circuit design.
How deep does the floor need to be for a floor socket?: The required depth depends on the socket, its box and the cable entry, so always check the manufacturer's dimensions before cutting into a floor. Raised access floors usually have plenty of room, while screeded floors need the box and conduit set at first fix. If the void is shallow, a floor box designed for low-depth installation may be a better option.
What is a blank plate used for with floor sockets?: A blank plate covers an unused floor box or socket position, keeping the floor tidy and stopping dirt and debris getting into the box. It is useful when positions are installed for future flexibility, for example in offices where desk layouts may change. The Tass 2 gang blank plate in this range suits 2 gang positions.
Can I fit a floor socket in a timber floor?: Yes, floor sockets can be fitted in suspended timber floors, provided the box is properly supported between joists and the cables are protected and supported in the void. Make sure the cut-out does not weaken a joist and that the socket sits flush with the finished floor covering. Check current wiring regulations for cable routes and protection, and follow the socket manufacturer's instructions.
Do floor sockets need RCD protection?: In most installations, socket outlets for general use need additional protection by an RCD, and floor sockets are treated the same way. The exact requirement depends on the circuit, the location and the type of building, so check current wiring regulations (BS 7671) and the design documents. RCBOs at the consumer unit are a common way to provide this protection circuit by circuit.