Fixings
Fixings are the anchors and plugs that let a screw or bolt grip securely in concrete, masonry or hollow walls when the base material cannot hold a thread on its own. The range covers Olympic Fixings and generic M6 to M10 drop-in anchors, loose shield bolts, hammer fixings, Unicrimp spring toggles and red and blue Zinc Alloy Drivas for plasterboard.
From light accessory fixing to heavier enclosures and strut, there is an option for most substrates. Trade customers buy at trade prices, with next-day delivery across Northern Ireland and ROI on weekday orders in by 5pm.
How to choose the right fixing for walls and ceilings
Choosing a fixing comes down to the substrate, the load and whether the fixing needs to be removable. The wrong choice can lead to fittings sagging or pulling out, so it is worth a minute's thought before drilling.
Types of fixing in this range
- Drop-in anchors – internally threaded steel sleeves set into concrete with a setting tool, taking a set screw or threaded rod. Ideal for suspending containment from soffits.
- Loose shield bolts – expanding sleeve anchors supplied with a bolt, giving strong fixings in concrete and solid masonry for brackets and heavier equipment.
- Hammer fixings – plug and screw pre-assembled, hammered in for fast fixing of clips, battens and conduit saddles.
- Spring toggles – wings that open behind plasterboard or hollow panels to spread the load.
- Zinc Alloy Drivas – self-drill plasterboard fixings for lighter items such as accessories and small enclosures.
Things to check
Look at the drill diameter, minimum embedment depth, edge and spacing distances, and the maximum fixture thickness. Concrete is far stronger than block or brick, and hollow or crumbling substrates need special care. Where cables or containment run overhead, consider how the fixings will behave in a fire; current wiring regulations require wiring systems in many locations to be supported against premature collapse, so steel anchors are often the safer choice.
Installation tips
Drill square to the surface, blow or brush the hole clean, and use the correct setting tool for drop-in anchors so the sleeve expands fully. Do not over-torque shield bolts. Pair anchors with suitable SDS and masonry drill bits and the right nuts, bolts and washers; for lighter work, see wall plugs.
About ordering
Meteor Electrical is a family-run wholesaler with depots in Cookstown, Cashel and Saggart. Free delivery kicks in over £30 or €35 ex VAT, and the sales team can be reached on 028 8675 1515 during office hours.
FAQ's
- How do drop-in anchors work?
- What fixing should I use for plasterboard?
- Can shield bolts be used in brick?
- What size drill bit do I need for an M10 drop-in anchor?
- Are plastic plugs suitable for overhead fixings?
- Can I collect fixings the same day?













