T49144-030
C.K Dextro VDE Screwdriver Slotted Parallel 3.0 x 100mm T49144-030
The C.K Dextro VDE 3.0 x 100 mm is an insulated slotted screwdriver with a fine parallel tip for small terminal screws. It is VDE approved and individually tested at 10,000V for live working up to 1,000V AC.
Product Information
The narrow 3.0 mm blade suits small terminal screws on control gear, relays, contactors, terminal blocks and data or alarm connections. Because the tip is parallel rather than flared, it can reach screws sitting down inside a terminal opening.
The chrome vanadium steel blade has a precision-machined tip for a close fit in the slot. The two-component handle is moulded directly onto the blade for a strong bond. Its long, fine neck lets you spin screws in quickly with your fingertips, while ridges near the head give extra grip for final tightening. The tip type is marked on the end of the handle for quick identification.
- 3.0 mm parallel slotted tip, 0.5 mm thick
- 100 mm blade, 195 mm overall
- Chrome vanadium steel blade
- Dual-component ergonomic handle
Specifications
| Brand | C.K Tools |
|---|---|
| Range | Dextro VDE |
| Manufacturer code | T49144-030 |
| Tip type | Slotted (parallel) |
| Blade width | 3.0 mm |
| Tip thickness | 0.5 mm |
| Blade length | 100 mm |
| Overall length | 195 mm |
| Blade material | Chrome vanadium steel |
| Insulation | VDE 1000 V, individually tested at 10,000 V |
| Standards | IEC 60900, VDE 0682/201, ISO 2380 |
| Weight | 37 g |
Product Details
| Brand | C.K TOOLS |
|---|---|
| Screwdriver Type | Slotted |
| Insulated | Yes |
| Material | Steel |
Delivery Information
| Location | Shipping Method | Shipping Charges | Timescales |
|---|---|---|---|
| Mainland UK | Standard Delivery | £3.95 | 3-5 working days |
| Northern Ireland | Standard Delivery | £3.95 | Next working day on in-stock items ordered by 5pm |
| Republic of Ireland | Standard Delivery | £3.95 | Next working day on in-stock items ordered by 5pm |
Free delivery on orders over £30 (ex VAT).
* Please note that delivery prices and services may vary depending on other items in your basket and your exact delivery postcode. Find out more about our delivery services.
Cancellations and Returns
Meteor Electrical Limited will accept returns up until 14 days after dispatch date on the conditions
- The Goods are in all original packaging
- The materials contain all original documentation (instructions, manuals, warranties or any other literature)
- Product is deemed by our returns department to be in a re-sellable condition
All refunds are made to the same payment method used originally to place the order (e.g. VISA Card) - unless specifically requested otherwise.
Faulty Products
- Products that are faulty must be returned within the manufacturer’s warranty period.
- The complete product must be returned, unless previously agreed by Meteor Electrical in writing; incomplete items of parts may not be returned.
- Products within the manufacturers specific warranty period will be repaired, replaced, or a refund given at the discretion of the Manufacture.
Frequently Asked Questions
The blade stays the same width right down to the tip instead of flaring out, so it can enter recessed terminal openings without catching on the sides.
It is sized for small terminal screws, such as those on control gear, terminal blocks and low-voltage connections.
The tip is 3.0 mm wide and 0.5 mm thick, on a 100 mm blade with an overall length of 195 mm.
No. Prying or scraping can damage both the tip and the insulation. Use it only for driving screws, and check the insulation before each use.