Outdoor Lighting

Outdoor light fittings are used to illuminate external environments. There are many different types of outdoor light fixtures including up and down lights, lanterns, floodlights, spotlights, and many other external light fittings of which we offer at Meteor Electrical! 

Due to their need to survive the weather, outdoor light fittings are unique. To withstand the infiltration of rainfall, external light fittings must have an IP23 rating at the very least. The protection increases as the number rise. Additionally, outdoor light fittings have a durable finish to resist fading and harm from wind and rain.

Our range of external light fittings is designed to be extremely long-lasting. The finish and materials of the outdoor light fittings are made of composite material to ensure the robustness of the light fixture. 

The material ensures the external light fittings will not rust and take to the weather conditions well. Our outdoor light fixings which are made from polymer-made materials are designed to last for a long period of time. We also have external light fittings that are made of solid brass and copper - these light fittings are slightly more expensive but are designed to be rust-free and extremely durable. 

There are several outdoor lights available in many kinds that won't rust. There are several finishes available for those made of composite materials. In a coastal area, they will not rust and will weather quite well. Polymer-made items are often black or white and last for a very long period, especially close to the ocean. Lights made of solid brass and copper are available. Although they are often more expensive than those constructed from composite materials or polymers, they won't rust.

Integrated LED outdoor lighting denotes the absence of a lightbulb on the fixture. It is equipped with built-in LEDs, often an LED module but not necessarily. The LEDs are coupled to a tiny circuit board that, in some circumstances, may be changed. When a fitting reaches the end of its useful life, it must be appropriately disposed of if it cannot be replaced. A lifespan for integrated LED outdoor light fittings ranges from 25,000 to 35,000 hours.

LED external light fittings are getting cheaper and more powerful all the time. They are now extremely energy-efficient, emit no heat, and are hence safe to touch. LED outdoor lighting is replacing conventional lighting as there are more benefits in installing external lighting. 

The benefits of LED outdoor light fittings include providing a brighter light which helps to increase the illumination on roadways, walkways, and pathways. LED outdoor light fixtures provide massive energy savings and are more eco-friendly to the environment. LED external light fixings also have a longer lifespan compared to traditional lighting. The expected life of external light fittings is over 50,000 hours depending on the usage. 

It is important when choosing an outdoor light fitting to identify where you want to install the lighting system. 

Always take into account whether the outside area is covered or completely exposed to the weather when choosing your external wall light. In the latter scenario, search for outdoor wall light with high IP certification for weather resistance.

For an exposed wall, IP65 is a widely used choice because it protects against dust and low-pressure water jets from any direction. IP44 fittings can suit sheltered spots such as under a porch or canopy where they will not take direct rain. Ground-recessed and drive-over lights usually need a higher rating again. Always check the manufacturer's recommended mounting position alongside the IP rating.

Yes, if the fitting is designed for GU10 lamps, as the Kosnic Swimley and Ocala wall lights are. GU10 LED lamps let you choose the colour temperature and beam angle, and replace a failed lamp without changing the whole fitting. Check the maximum wattage and any lamp size restrictions in the fitting's instructions, and only dim lamps that are marked dimmable using a compatible dimmer.

In most installations, yes. Current wiring regulations in the UK and Ireland generally require additional RCD protection for circuits supplying equipment outdoors, as well as many final circuits in dwellings. Exact requirements can depend on the installation type, so check current wiring regulations such as BS 7671, or the equivalent Irish national rules, and have the work carried out or certified by a competent electrician.

For an exposed wall, IP65 is a widely used choice because it protects against dust and low-pressure water jets from any direction. IP44 fittings can suit sheltered spots such as under a porch or canopy where they will not take direct rain. Ground-recessed and drive-over lights usually need a higher rating again. Always check the manufacturer's recommended mounting position alongside the IP rating.

Yes, if the fitting is designed for GU10 lamps, as the Kosnic Swimley and Ocala wall lights are. GU10 LED lamps let you choose the colour temperature and beam angle, and replace a failed lamp without changing the whole fitting. Check the maximum wattage and any lamp size restrictions in the fitting's instructions, and only dim lamps that are marked dimmable using a compatible dimmer.

In most installations, yes. Current wiring regulations in the UK and Ireland generally require additional RCD protection for circuits supplying equipment outdoors, as well as many final circuits in dwellings. Exact requirements can depend on the installation type, so check current wiring regulations such as BS 7671, or the equivalent Irish national rules, and have the work carried out or certified by a competent electrician.