The Electrical Trade Counter That Comes To You.

Inc. VAT Exc. VAT
My Basket £0.00

Order by 5pm for next working day delivery on in-stock items across Northern Ireland & the Republic of Ireland


atc Logo

Z-2651M

ATC Cub High Speed Hand Dryer Stainless Steel

ATC Cub High Speed Hand Dryer Stainless Steel.

Key Features:

  • Voltage – 220/240V
  • Frequency (Hz) – 50 / 60Hz
  • Motor Type – Brush Type
  • Power Output – 1150Watts
  • Motor Power – 500Watts
  • Heating Power – Off/650W
  • Amps – 5.2 Amps
  • Sensor – 0-250mm
  • Drying Time – 15 seconds
  • Air Speed – 65 m/s
  • Noise Level: 72dB at 1m
  • Dimensions: Height 280mm, Depth 162mm, Weight 3.2kg
  • 1 Year Warranty
In-Stock
£109.44
inc. VAT

Qualifies for Free Delivery

-
+

Customers Also Purchased (3)

Product Information

The ATC Cub is a compact, automatic high-speed hand dryer with a brushed stainless steel cover. At just 280mm high and 153mm wide it suits small washrooms, cloakrooms and staff toilets where wall space is limited, while still giving a quoted drying time of around 15 seconds.

An infrared sensor starts the dryer when hands are placed underneath, and it delivers an air speed of 65m/s. The heating element can be switched off, so the dryer runs on the motor alone to cut energy use, or left on for warm air in colder washrooms. A 45 second safety cut-out stops the dryer running continuously if the sensor is blocked.

  • Brushed stainless steel cover, model Z-2651M
  • Switchable heater, up to 1300W with heat on
  • Approx. 15 second drying time
  • 72dB noise level at 1m
  • IPX1 rated

The Cub is also available in white and matt black painted finishes. Installation must comply with current wiring regulations, and it is covered by the manufacturer's warranty.

Specifications

ModelZ-2651M
FinishBrushed stainless steel
Maximum power1300W (with heater on)
Supply220-240V, 50/60Hz
Air speed65 m/s
Drying timeApprox. 15 seconds
Noise level72dB at 1m
IP ratingIPX1
Dimensions (H x W x D)280 x 153 x 162 mm
Weight3.2 kg
ActivationAutomatic infrared sensor
Safety cut-out45 seconds

Product Details

More Information
Brand atc
Weight (kg) 0.000000
Wattage 1150W
Product Range Hand Dryers

Delivery Information

Location Shipping Method Shipping Charges Timescales
Mainland UK Standard Delivery £3.95 3-5 working days
Northern Ireland Standard Delivery £3.95 Next working day on in-stock items ordered by 5pm
Republic of Ireland Standard Delivery £3.95 Next working day on in-stock items ordered by 5pm

Free delivery on orders over £30 (ex VAT).

* Please note that delivery prices and services may vary depending on other items in your basket and your exact delivery postcode. Find out more about our delivery services.



Cancellations and Returns

Meteor Electrical Limited will accept returns up until 14 days after dispatch date on the conditions

  • The Goods are in all original packaging
  • The materials contain all original documentation (instructions, manuals, warranties or any other literature)
  • Product is deemed by our returns department to be in a re-sellable condition

All refunds are made to the same payment method used originally to place the order (e.g. VISA Card) - unless specifically requested otherwise.

Faulty Products

  • Products that are faulty must be returned within the manufacturer’s warranty period.
  • The complete product must be returned, unless previously agreed by Meteor Electrical in writing; incomplete items of parts may not be returned.
  • Products within the manufacturers specific warranty period will be repaired, replaced, or a refund given at the discretion of the Manufacture.

Frequently Asked Questions

Can the heater be switched off to save energy?

Yes. The Cub has a switchable heating element. With the heater off, only the motor runs, which uses considerably less power while still drying hands with high-speed air. With the heater on, the maximum consumption is 1300W. Check the manufacturer's instructions for how to change the heater setting on the unit.

Is the ATC Cub suitable for a small washroom?

Yes. It is one of the more compact high-speed dryers at 280mm high, 153mm wide and 162mm deep, so it fits in narrow spaces such as cloakrooms and single-occupancy toilets. Its noise level is quoted at 72dB at 1m. Consider the mounting height and space beneath the outlet so users can dry hands comfortably.

Can it be fitted near a basin?

The Cub is rated IPX1, which offers only limited protection against vertically dripping water. Mount it away from basins and areas where it could be splashed, and follow the bathroom zone requirements in current wiring regulations. Check the manufacturer's instructions for recommended mounting height and clearances before installation.

How should the hand dryer be wired?

It runs from a 220-240V supply and should be permanently connected, usually from a suitable isolating switch or fused spur, by a competent electrician. Circuit design must take account of the maximum load and any other dryers on the same circuit. Check the manufacturer's instructions for terminal and cable details and make sure the installation complies with current wiring regulations.