Screwdrivers

Screwdrivers for electricians are hand tools for driving terminal and fixing screws, and insulated 1000V VDE models are the standard for electrical work. This range is led by the C.K DextroVDE and DextroVDE Slim screwdrivers in slotted, PH, PZ, PZD and modular tips, alongside C.K VDE sets with interchangeable blades, a Selectric 14-piece multi screwdriver set and 5-piece insulated sets.

Mains testers, a flexible shaft driver and M3.5 and M4 re-threaders are here too. Buy on account at trade prices, with next working day delivery in NI and ROI on weekday orders before 5pm.

Yes
Clear All

T4925 In-Stock

C.K VDE Interchangeable Slim Blade Screwdriver Set 9 Piece T4925

£45.05 inc. VAT

CK's VDE 120-250V Mainstester by Meteor Electrical

440007 In-Stock

C.K VDE Mainstester 120-250V AC with Pocket Clip 440007

£5.11 inc. VAT

CK's 5 Piece Insulated Screwdrivers Set by Meteor Electrical

AV05050 In-Stock

Avit Insulated Screwdriver Set 1000V 5 Piece AV05050

£26.46 inc. VAT

CK's Screwdriver set - Insulated 5 Piece by Meteor Electrical

T4729 Ships in 3 - 5 days

C.K Triton XLS 1000V Insulated Screwdriver Set SL/PZ 5 Piece T4729

£28.16 inc. VAT

T49243-1 Ships in 3 - 5 days

C.K Dextro VDE Slim Screwdriver Pozidriv PZ1 x 100mm T49243-1

£12.29 inc. VAT

T49243-2 In-Stock

C.K Dextro VDE Slim Screwdriver Pozidriv PZ2 x 125mm T49243-2

£15.79 inc. VAT

T49245-1 Ships in 3 - 5 days

C.K Dextro VDE Slim Modulo Screwdriver SL/PZ1 x 100mm T49245-1

£13.52 inc. VAT

T49245-2 Ships in 3 - 5 days

C.K Dextro VDE Slim Screwdriver MOD2 x 125mm T49245-2

£16.39 inc. VAT

T49244-035 Ships in 3 - 5 days

C.K Dextro VDE Slim Screwdriver Slotted 3.5 x 100mm T49244-035

£9.46 inc. VAT

T49244-040 In-Stock

C.K Dextro VDE Slim Screwdriver Slotted Parallel 4.0 x 100mm T49244-040

£11.10 inc. VAT

T49244-055 In-Stock

C.K Dextro VDE Slim Screwdriver Slotted Parallel 5.5 x 125mm T49244-055

£11.64 inc. VAT

T49142-1 Ships in 3 - 5 days

C.K Dextro VDE Screwdriver PH1 x 80mm T49142-1

£8.62 inc. VAT

T49142-2 Ships in 3 - 5 days

C.K Dextro VDE Screwdriver PH2 x 100mm T49142-2

£9.72 inc. VAT

T49143-1 Ships in 3 - 5 days

C.K Dextro VDE Screwdriver Pozidriv PZ1 x 80mm T49143-1

£9.04 inc. VAT

T49143-2 Ships in 3 - 5 days

C.K Dextro VDE Screwdriver PZ2 x 100mm T49143-2

£10.36 inc. VAT

T49144-025 Ships in 3 - 5 days

C.K Dextro VDE Screwdriver Slotted Parallel 2.5 x 75mm T49144-025

£7.07 inc. VAT

T49144-030 Ships in 3 - 5 days

C.K Dextro VDE Screwdriver Slotted Parallel 3.0 x 100mm T49144-030

£7.73 inc. VAT

T49144-035 In-Stock

C.K Dextro VDE Screwdriver Slotted Parallel 3.5 x 100mm T49144-035

£9.53 inc. VAT

T49144-040 In-Stock

C.K Dextro VDE Screwdriver Slotted Parallel 4.0 x 100mm T49144-040

£9.06 inc. VAT

T49144-055 In-Stock

C.K Dextro VDE Screwdriver Slotted Parallel 5.5 x 125mm T49144-055

£9.74 inc. VAT

C.K DextroVDE 1000v Screwdriver Slotted Parallel 6.5x150mm T4914

T49144-065 Ships in 3 - 5 days

C.K Dextro VDE Screwdriver Slotted Parallel 6.5 x 150mm T49144-065

£10.69 inc. VAT

T49183D In-Stock

C.K Dextro VDE Screwdriver Set 5 Piece Slotted/Pozidriv T49183D

£45.07 inc. VAT

C.K STUBBY VDE SLIM 1000v Screwdriver Set of 4 T48349

T48349 In-Stock

C.K Stubby VDE Slim Screwdriver Set of 4 T48349

£36.89 inc. VAT

T4897 In-Stock

C.K VDE Precision Screwdriver Set 7 Piece T4897

£25.76 inc. VAT

T49142-0 In-Stock

C.K Dextro VDE Screwdriver Phillips PH0 x 60mm T49142-0

£7.25 inc. VAT

T49283PD Ships in 3 - 5 days

C.K Dextro VDE Slim Glo Screwdriver Set 5 Piece SLP/PZ T49283PD

£85.92 inc. VAT

How to choose the right screwdrivers

An electrician uses a screwdriver more than almost any other tool, so getting the right tips, insulation and grip pays off every day.

Tip types

Slotted (flat) – for terminal screws and older accessories; parallel tips reach into recessed terminals without catching on the sides.
Pozidriv (PZ) – the common cross-head for fixing screws and many accessory screws in the UK and Ireland.
Phillips (PH) – found on some imported equipment; do not mix with PZ.
PZD and modular tips – combination slotted/cross tips designed for modern MCB and terminal screws.

VDE and slim insulation

VDE screwdrivers are individually tested and rated for work near live parts up to 1000V AC. Slim versions, like the DextroVDE Slim, have reduced-diameter insulated shafts that reach deep into recessed terminals on sockets, switches and consumer unit devices. Check insulation for damage before each use, and remember that insulated tools are a back-up, not a substitute for safe isolation.

Sets versus individual drivers

Sets give a cost-effective start with the most common sizes, while interchangeable blade sets save space in the bag. Individual drivers make sense for replacing worn tips or adding specialist sizes. Keep tips in good condition: worn tips cam out and damage screw heads.

Handy extras

Re-threaders clean up damaged M3.5 and M4 threads in back box lugs, and a flexible shaft screwdriver reaches awkward screws. Pair your drivers with voltage testers, accessory screws and back boxes.

Family-run Meteor Electrical stocks over 5,000 lines from 100+ brands, with free delivery on orders over £30 or €35 ex VAT.

FAQ's Ask Your Own Question

What is a PZD screwdriver tip?: PZD is a combination tip designed for screws that have both a slot and a Pozi-style cross, which are common on MCBs, RCBOs and many modern terminals. It grips both recesses at once, giving better torque transfer and less cam-out than a plain slotted or Pozi driver. C.K DextroVDE PZD1 and PZD2 sizes are in this range.
What is the difference between slim and standard VDE screwdrivers?: Slim VDE screwdrivers have a thinner insulated shaft that tapers to the tip, so they fit deep, narrow terminal recesses in sockets, switches and consumer unit devices. Standard VDE drivers have a thicker insulation sleeve. Both are rated to 1000V; choose slim versions where access is tight and standard ones for general use.
What screwdriver sizes do electricians use most?: The most commonly used sizes are slotted 2.5mm, 3.5mm and 5.5mm for terminals, PZ1 and PZ2 for fixing and accessory screws, and PZD or modular tips for circuit breakers. A small slotted terminal driver is used constantly. Many electricians start with a five or seven-piece VDE set and add individual sizes as needed.
What is a re-threader used for?: A re-threader, also called a thread restorer, cleans and re-forms damaged threads in back box fixing lugs so accessory screws can be fitted securely. The M3.5 version suits standard UK and Irish socket and switch boxes, while the M4 version suits some other fittings. It saves replacing a box when a lug thread has been stripped or painted over.
Can a mains tester screwdriver prove a circuit is dead?: No. A neon mains tester screwdriver gives only a basic indication of voltage and can fail to light in some conditions. It is not suitable for proving dead. Use an approved two-pole voltage indicator with a proving unit as part of a recognised safe isolation procedure before working on any circuit.
When should I replace a screwdriver?: Replace a screwdriver when the tip is rounded, chipped or twisted, as worn tips slip and damage screw heads. For VDE screwdrivers, withdraw the tool if the insulation is cut, cracked, burnt or showing a different colour layer underneath. Do not repair damaged insulation with tape, as it will no longer meet its rating.