Thermostats & Timers

A digital thermostat allows a homeowner to set the temperature inside their home and create a preset heating and cooling schedule. Digital thermostats, unlike analogue thermostats, have a digital display for temperature and settings.

A bimetallic strip situated inside the thermostat is used to operate an analogue thermostat. The bimetallic strip is comprised of two separate metal strips that are attached together and open and close the electrical circuit as the room temperature fluctuates.

According to the Energy Saving Trust, it is advised to only use the heating on when required. Leaving the heating on all day would result losing energy. It is advised to use a timer to control your heating for periods of the day when you require heating for example, in the morning or the evening. You would be able to use the timer to control when to turn off the heating for example, while you are at work to save energy.

Digital thermostats are slightly more expensive than analogue thermostats, however the energy savings that digital thermostats may deliver readily offset this cost difference.

Yes, you can seat a timer on thermostats for when your heating or air-conditioning unit should be on, off, or at a reduced operation using a programmable thermostat. You can save money by using a thermostat timer.

There are many benefits for installing thermostats and timers to your home or business. The key benefits is the ability to take full control on the heating from the time and temperature. Another benefit of installing thermostats and timers is the devices will help the end user to save money on their energy bills and electricity bills.

It is strongly advised to contact your local qualified and knowledgeable electrician to install the timers and thermostats to ensure safe installation.

The more thermostat timers you have, the better. The reason for this is that it will help you save money when heating or cooling certain rooms. Some rooms are probably not used as much as others, so maintaining comfort in those that are used is more important than having a one-size-fits-all approach. 

If there is a case where the temperature is not set to your preference, it might not be the faulty thermostat timer. The most common reason for this problem often stems from your HVAC system or the ductwork. Having professionals do a check up on these should bring the real problem to light. 

A: A central heating timer control is a device used to schedule when your heating system turns on and off. It allows you to program specific times for heating to activate, providing warmth and comfort according to your daily routine.

A: Setting the central heating timer control is crucial for optimizing energy usage and ensuring comfort. By programming heating cycles to align with your schedule, you can avoid unnecessary heating when the house is unoccupied, thereby reducing energy costs.

 A: The central heating timer control is typically located near the boiler or in a central area of your home. Look for a digital display panel with buttons or dials for programming.

 A: To set the central heating timer control, start by programming the current time and then create heating schedules for different times of the day based on your preferences and occupancy patterns.

A: Yes, most central heating timer controls allow you to create separate schedules for weekdays and weekends. This feature enables you to adjust heating cycles according to your varying routines.

 A: It's advisable to review and update the heating schedule regularly to accommodate changes in your routine or seasonal variations in temperature. By keeping the schedule up to date, you can maintain comfort and energy efficiency.

A: If you encounter any difficulties or have questions about setting the central heating timer control, refer to the manufacturer's instructions or seek assistance from a qualified heating engineer.

A programmer controls when the heating or hot water is allowed to run, while a room thermostat controls how warm the room gets during those periods. Most central heating systems use both: the programmer sets the time windows and the thermostat switches the boiler off once the set temperature is reached.

Yes, with a smart immersion controller such as the Secure Smart Immersion Heater Control. It replaces a standard immersion switch or timer and lets you schedule and boost the immersion remotely, helping avoid heating water when it is not needed. Check the controller's rating and wiring requirements against the immersion heater before installing.

Yes, each independently controlled zone needs its own thermostat to sense and control its temperature. A typical home with separate upstairs and downstairs zones might use a 3 channel programmer or multi-channel receiver alongside two room thermostats. Building regulations may set minimum zoning requirements for new installations, so check current guidance.