Heating

Electric heating covers any heater that converts electricity into warmth, from wall-mounted panel heaters and radiators to underfloor mats, water heaters and outdoor heaters. This section includes ATC Almeria Eco panel heaters, Heat My Home underfloor heating cables and mats, the Illumina 400W frost watcher and the Secure Intelligent Thermostatic Radiator Valve.

With around 80 products for homes, offices and commercial sites, there is a solution for most rooms. Trade accounts unlock trade prices, and stock ordered before 5pm on a weekday reaches NI and ROI the next working day.

ATC Heated Towel Radiator 1100mm x 600mm - 300W - Chrome

TRC1100-500-ELE300 In-Stock

ATC Heated Towel Radiator 1100mm x 500mm Chrome - 300W Heating Element

£235.49 inc. VAT

Finding the right electric heating for each space

No single heater suits every room. A bathroom, a shop doorway and a garden terrace each need a different type of heat, so this category is split into focused ranges to help you narrow the choice quickly.

Our heating ranges at a glance

Panel heaters – slim ATC Almeria Eco models, including Wi-Fi versions, for living spaces and offices.
Lifestyle electric radiators – ATC iLifestyle smart radiators and Sun Ray thermal radiators.
Underfloor heating – Heat My Home mats and loose cables for tiled floors.
Outdoor heaters – quartz and infrared ATC heaters for patios and terraces.
Specialist heat – overdoor, bathroom, towel rail, tubular, convector, smart and under-sink water heaters.

Matching heater to room

Rooms used every day are best served by heaters with accurate electronic thermostats and timers, such as panel heaters or radiators. Underfloor heating suits kitchens and bathrooms where wall space is limited. Garages, lofts and outbuildings often need only frost protection from a tubular heater or frost watcher. Commercial entrances benefit from overdoor heaters, while beer gardens and smoking shelters call for radiant outdoor heaters.

Sizing and installation

Start with a heat loss estimate based on room size, insulation and glazing, then choose an output with a little headroom. Fixed heaters should be connected by a competent electrician, typically via a fused connection unit or dedicated circuit depending on the load, and wet-room or outdoor installations need extra attention to IP ratings and RCD protection. Check current wiring regulations and the manufacturer's instructions for each product.

Supplied by Meteor Electrical

From our Cookstown head office and depots in Cashel and Saggart, we deliver next working day across Northern Ireland and the Republic on in-stock orders placed by 5pm Monday to Friday. Free delivery applies over £30 / €35 ex VAT.

FAQ's Ask Your Own Question

Should I leave my heating on 24/7?: It is strongly advised to not keep your heating on 24/7 to save energy. However, keeping your heating on is a personal preference and depends on the type of heating system. It is recommended to use a room stat and timer to allow superior control over the time and temperature settings.
What is the most energy efficient heating system?: Electric radiators and infrared panels are the most efficient form of electric heating because both use radiant heat to maintain room temperatures.
Where should radiators be positioned?: The location is entirely up to you, most radiators are effective enough to heat the space regardless of where they are installed. However, radiators are typically placed at the room's coldest area, either against an exterior wall or under a window. This helps to prevent draughts and cold patches, and because the wall space under a window isn't usually useable owing to space constraints, it's a suitable place to put your radiator.
Why is my heating system cold at the top and hot at the bottom?: This is frequently caused by trapped air at the radiator's top. The air should be released, and the problem should be resolved after bleeding the radiator. If this doesn't work, we recommend having your central heating system inspected by an electrician to rule out any underlying system issues.
Why is my heating system hotter at the top than the bottom?: Assuming the radiator has reached working temperature, this indicates a build-up at the bottom of the radiator. In this circumstance, the heating system will be inefficient and needs to be repaired as soon as possible. We recommend that the heating system be inspected to see if there are any underlying issues.
Why are some of my heating systems hotter than others?: This typically indicates that your central heating system is out of balance. The heating water does not flow uniformly to each radiator because of this, and it is advisable to have it examined by your local electrician.
Who should install the radiators?: Our range of radiators should be installed by your local qualified electrician.
What type of electric heater is best for each room?: Panel heaters or electric radiators with electronic thermostats suit living rooms, bedrooms and offices. Underfloor heating works well in tiled kitchens and bathrooms, and towel radiators or downflow heaters are designed for bathrooms. Tubular heaters and frost watchers protect garages and outbuildings, while overdoor and outdoor heaters handle entrances and terraces.
How do I work out what size electric heater I need?: Estimate the room's heat loss from its volume, insulation, glazing and number of outside walls. As a rough guide, a well-insulated room may need around 50–70W per square metre, while older, poorly insulated rooms may need 100W or more. For accurate sizing, use a heat loss calculation or the manufacturer's sizing guidance.
Do electric heaters need their own circuit?: Not always. Smaller fixed heaters are often supplied from an existing ring or radial circuit through a fused connection unit, provided the circuit has capacity. Larger loads, several heaters together, or underfloor heating systems may need a dedicated circuit. A competent electrician should assess the installation against current wiring regulations.