AlertCam c/w Remote Wirefree Internal Alarm/Chime Device

Manufacturer : ESP

AlertCam is a stand alone weather proof light switching passive infra-red detector with integral CCTV camera and built in video recording device. On detection AlertCam will switch up to 500w of lighting directly for the unit and start storing clear still colour images at a rate of 2 shots per second for 20 seconds. Alertcam also has the ability to send a wire free signal , at a distance of up to 65M, to any number of dedicated receiver devices. There are two types of optional device. AlertCamRA an alarm/chime device to inform occupants of activity outside or AlertCamRS a 240VAC unit that can be used to switch additional lighting up to 1500W or trigger other devices such as intruder alarm systems or voice diallers via a relay. Complete external PIR camera system with RF controlled light and alarm activation. On approach AlertCam will:

• Detect the intruder
• Trigger lighting up to 500W
• Initiate a video recording within the unit
• Send a wirefree trigger to the remote chime/alarm device
• Send a wirefree trigger to the remote 1500w switching device

Technical Details

• PIR detection range: 10m
• PIR detection angle: 160 Deg ( adjustable )
• Camera viewing angle: 60 deg
• Camera resolution: 640x480
• Max direct load: 500W ( 50W LED )
• Camera controls: Automatic white balance and exposure
• Recording medium: SD (FAT16) or SDHC ( FAT32 ) Max 64GB
• Record rate: 2 FPS for 20secs per trigger
• Recording capacity with supplied 2GB SD: 1,000 files of 40 images
• Image format: JPEG (converts to video stream via bespoke software)
• USB interface: Micro B type USB2
• RF Trigger range: Up to 50M – Clear line of sight
• IP Rating: IP55
• Dimensions: 108(D) x73(W) x138(H)mm

Specification about product, Keep Here

No Attachments Available